TMC-20X車載式岩芯鑽機
發布時間：2016/3/10 16:27:09來源：天明機械集團有限公司人氣：29400
TMC-20X車載式岩芯鑽機主要用于以合金、金剛石爲主的岩芯鑽探，也可用于工程地質勘探、水文、水井鑽探、淺層石油、天然氣、地熱的勘探開發，以及大口徑基礎樁施工，還可用于堤壩注漿和坑道通風排水等工程施工鑽進。該鑽機結構合理、機動性能好、集成化程度高、鑽進能力大、用途廣泛、性能穩定、可靠性強、标準化程度高。
|
最高車速max. speed |
105km/h |
|
驅動型式driven type |
6×6 |
|
鑽塔額定載荷drill tower rated load |
20t |
|
孔口裝置直徑diameter of orifice device |
325mm |
|
立軸最大扭矩max torque of vertical shaft |
5800Nm |
|
立軸最大起重力max lifting power of vertical shaft |
160kN |
|
立軸轉速speed of vertical shaft |
62-1500rpm |
|
泥漿泵mud pump |
額定流量rated flow |
600lpm |
|
壓力pressure |
10MPa |
|
發電機generator |
功率power |
40kW |
|
電壓/電流voltage/current |
400V/72.2A |
|
鑽機柴油機drill rig diesel engine |
型号module |
4BTA3.9-C110 |
|
功率power |
82kW@1800rpm |
動力站柴油機
power station diesel engine |
型号module |
6BTA5.9-C150 |
|
功率power |
110kW@1800rpm |
額定輸出電流
rated output current |
72.2A |
外形尺寸
outside dimension |
運輸狀态transporting |
12900×2500×3992mm |
工作狀态
working |
16500×2850×20520mm |
整機質量
weight |
24500kg |
鑽 杆 類 别
drill rod type |
鑽 杆 規 格
drill rod size |
鑽進深度
drilling depth |
國産鑽杆
domestic drill rod |
内加厚式鑽杆
Internal thickening drill rod |
φ55×5.5鑽杆drill rod |
1600m |
|
φ60×6鑽杆drill rod |
1200m |
繩索取芯鑽杆
cord core drill rod |
φ55.5×4.75鑽杆drill rod |
1700m |
|
φ71×5鑽杆drill rod |
1300m |
|
φ89×5鑽杆drill rod |
1000m |
DCDMA（金剛石岩芯鑽機制造商協會）鑽杆
(Diamond Core Drill Manufacturers Association) drill rod |
内加厚式鑽杆
Internal thickening drill rod |
BW鑽杆drill rod |
1650m |
|
NW鑽杆drill rod |
1300m |
|
HW鑽杆drill rod |
850m |
繩索取芯鑽杆
cord core drill rod |
BQ鑽杆drill rod |
2000m |
|
NQ鑽杆drill rod |
1600m |
|
HQ鑽杆drill rod |
1250m |
-
水文水井鑽進Hydrological Well Drilling
鑽 杆 規 格
drill rod size |
鑽孔直徑
drilling diameter |
鑽進深度
drilling depth |
60mm（外加厚）鑽杆
(external thickening) drill rod |
200mm |
1000m |
73mm（外加厚）鑽杆
(external thickening) drill rod |
350mm |
600m |
89mm（外加厚）鑽杆
(external thickening) drill rod |
500mm |
350m |